Basement Waterproofing

Basement Waterproofing

Cellar Conversion Waterproofing

Waterproofing designed as part of turning a cellar into a habitable room, coordinated with insulation, ventilation, electrics and Building Regulations.

Free Basement Waterproofing quote

No obligation. We only use your details to reply about this job.

Cellar Conversion Waterproofing — Basement Waterproofing

What's involved

Turning a cellar into a bedroom, office or snug is a change of use, so Building Regulations apply. The waterproofing has to reach Grade 3 under BS 8102, and it has to work with the other parts of the design: insulation, ventilation, fire escape, ceiling height and electrics. Your specialist will usually combine a cavity drain membrane with a sump system, then hand over to builders who fit insulated stud walls, a floating floor, extract ventilation and a means of escape. Getting the sequence right matters. Sockets, radiators and lighting must be planned so nothing pierces the membrane, and any lowered floor needs structural advice first. A straightforward conversion of an existing cellar typically takes three to six weeks in total. Speak to building control early and keep the waterproofing design and warranty paperwork for when you sell.

How we handle it

  1. Send your details

    Use the quote form to tell us about the space, how it is used now, what you want it for and any water you have seen. Photos of walls, floor and any staining help the specialist judge the job before visiting.

  2. Site survey

    A local waterproofing specialist inspects the basement inside and out, takes moisture readings, checks drains and ground levels, and discusses the grade of protection you need for your planned use.

  3. Written design and quote

    You receive a written recommendation explaining the system, why it suits your building, how long it will take and a fixed all-in price. Nothing is booked until you are happy with it.

  4. Installation

    The team protects access routes, strips old finishes, installs the membrane, tanking, channels and sump as designed, and tests the drainage before any boards or screed go on top.

  5. Handover and servicing

    You get system drawings, product details and warranty paperwork, plus advice on fixings and annual sump servicing so the basement stays dry for the long term.

Price guide

Basement waterproofing is priced per square metre of wall and floor treated, plus fixed costs for drainage channels, sump chambers and pumps. The biggest swings come from the grade of protection needed, the condition of the walls and how hard it is to get materials in and out. A survey fixes the scope, then you get one all-in written price.

  • Cavity drain membrane (walls and floor): £90–£160 per m². Supplied and fitted including sealing and perimeter channel; boarding and screed are usually extra.
  • Cementitious tanking: £70–£130 per m². Stripping, preparation, fillets and multi-coat slurry; replastering on top priced separately.
  • Sump pump system: £1,800–£3,500. Chamber, twin pumps, high-level alarm, battery backup and discharge pipework to outside.

Questions about cellar conversion waterproofing

How much does basement waterproofing cost in the UK?

Most UK basement waterproofing jobs cost £90–£160 per square metre for a cavity drain membrane, or £70–£130 per square metre for tanking. A typical small cellar made fully habitable with a membrane, sump pump and boarding comes to around £8,000–£18,000. Larger basements, poor access and pumped drainage push costs up. A survey gives you a fixed figure.

Do I need planning permission to waterproof a cellar?

Waterproofing an existing cellar does not normally need planning permission. Converting it into a habitable room does need Building Regulations approval, and digging out to create a new basement or lowering the floor may need planning permission and party wall notices. Listed buildings need listed building consent for most changes, so check with your council before work starts.

How long does basement waterproofing take?

A typical cellar of 20 to 30 square metres takes about one to two weeks to waterproof, including stripping old finishes, fitting the membrane, cutting perimeter channels and installing a sump. Tanking needs extra drying time before plastering. A full conversion with insulation, electrics and decoration usually runs three to six weeks from start to finish.

Get a free basement waterproofing quote

Tell us what you need and we'll come back with a clear price.

Request a quote