Basement Waterproofing guides
Practical, plain-English guides to costs, rules and getting the job done right.
How Much Does Basement Waterproofing Cost in the UK?
Most UK basement waterproofing costs £90–£160 per m² for a cavity drain membrane or £70–£130 per m² for cementitious tanking. A sump pump system adds £1,800–£3,500. A typical small cellar of 20 to 30 m² made habitable to Grade 3 usually comes to £8,000–£18,000 all in. A survey at £150–£350 fixes the scope and gives you one written price.
Read the guide →Cavity Drain Membrane vs Tanking: Which Is Better for a Basement?
A cavity drain membrane is usually the better choice for old UK cellars because it collects water and drains it away instead of trying to hold it back, and it copes with building movement. Tanking bonds to the wall to block water and suits sound walls with low water pressure. For habitable rooms, BS 8102 recommends considering combined protection, so many specialists use both.
Read the guide →BS 8102 Explained: Basement Waterproofing Types and Grades
BS 8102:2022 is the British Standard code of practice for protecting below-ground structures from groundwater. It sets three types of protection: Type A barrier (tanking), Type B structurally integral (waterproof concrete) and Type C drained (cavity membranes). It also sets Grades 1 to 3 describing how dry the space must be, with Grade 3 for habitable rooms where no water or dampness is acceptable.
Read the guide →Converting a Cellar into a Habitable Room: What's Involved
Converting a cellar into a habitable room means waterproofing it to BS 8102 Grade 3, then insulating, ventilating, wiring and finishing it to Building Regulations. It counts as a material change of use, so building control approval is needed. Waterproofing a typical 20 to 30 m² cellar costs £8,000–£18,000, with fit-out on top. Work usually takes three to six weeks.
Read the guide →Basement Sump Pump Maintenance: A Practical Guide
A basement sump pump should be professionally serviced once a year, from around £150. The engineer tests both pumps and the high-level alarm, cleans silt from the chamber, checks the battery backup and flushes the perimeter channels through inspection ports. Between services, test the alarm, listen for unusual running and keep the discharge outlet outside clear of leaves and debris.
Read the guide →Get a free basement waterproofing quote
Tell us what you need and we'll come back with a clear price.
Request a quote