Basement Waterproofing

Basement Waterproofing

Damp and Water Ingress Surveys

A specialist inspection to find where water is getting in, why, and which waterproofing grade and system suits your basement.

Free Basement Waterproofing quote

No obligation. We only use your details to reply about this job.

Damp and Water Ingress Surveys — Basement Waterproofing

What's involved

A good survey saves money because it stops you paying for the wrong fix. The surveyor looks at the walls, floor, ceiling and outside ground levels, checks for leaking drains, downpipes and blocked air bricks, and takes moisture readings. They ask how you plan to use the space, because BS 8102 sets out grades of protection: Grade 1 tolerates some seepage for car parks and plant rooms, Grade 2 means no water penetration for storage, and Grade 3 means a fully dry, ventilated environment for living space. The report recommends a system, often a combination of two, and flags risks such as a high water table, old lime mortar or a party wall. Surveys usually take one to two hours on site, with a written report and quote following within a few days.

How we handle it

  1. Send your details

    Use the quote form to tell us about the space, how it is used now, what you want it for and any water you have seen. Photos of walls, floor and any staining help the specialist judge the job before visiting.

  2. Site survey

    A local waterproofing specialist inspects the basement inside and out, takes moisture readings, checks drains and ground levels, and discusses the grade of protection you need for your planned use.

  3. Written design and quote

    You receive a written recommendation explaining the system, why it suits your building, how long it will take and a fixed all-in price. Nothing is booked until you are happy with it.

  4. Installation

    The team protects access routes, strips old finishes, installs the membrane, tanking, channels and sump as designed, and tests the drainage before any boards or screed go on top.

  5. Handover and servicing

    You get system drawings, product details and warranty paperwork, plus advice on fixings and annual sump servicing so the basement stays dry for the long term.

Price guide

Basement waterproofing is priced per square metre of wall and floor treated, plus fixed costs for drainage channels, sump chambers and pumps. The biggest swings come from the grade of protection needed, the condition of the walls and how hard it is to get materials in and out. A survey fixes the scope, then you get one all-in written price.

  • Damp and water ingress survey: £150–£350. Site inspection, moisture readings and a written report with recommendations; often credited against the work.
  • Annual sump service: from £150. Pump and alarm testing, chamber clean, battery check and channel flushing through inspection ports.
  • Typical small cellar to Grade 3: £8,000–£18,000. Around 20–30 m² floor area with membrane, sump and boarding ready for decoration.

Questions about damp and water ingress surveys

How much does basement waterproofing cost in the UK?

Most UK basement waterproofing jobs cost £90–£160 per square metre for a cavity drain membrane, or £70–£130 per square metre for tanking. A typical small cellar made fully habitable with a membrane, sump pump and boarding comes to around £8,000–£18,000. Larger basements, poor access and pumped drainage push costs up. A survey gives you a fixed figure.

Do I need planning permission to waterproof a cellar?

Waterproofing an existing cellar does not normally need planning permission. Converting it into a habitable room does need Building Regulations approval, and digging out to create a new basement or lowering the floor may need planning permission and party wall notices. Listed buildings need listed building consent for most changes, so check with your council before work starts.

How long does basement waterproofing take?

A typical cellar of 20 to 30 square metres takes about one to two weeks to waterproof, including stripping old finishes, fitting the membrane, cutting perimeter channels and installing a sump. Tanking needs extra drying time before plastering. A full conversion with insulation, electrics and decoration usually runs three to six weeks from start to finish.

Get a free basement waterproofing quote

Tell us what you need and we'll come back with a clear price.

Request a quote