Basement Waterproofing

Basement Waterproofing

Cementitious Tanking

Waterproof slurry or render applied directly to prepared walls and floors to form a continuous barrier against water and damp.

Free Basement Waterproofing quote

No obligation. We only use your details to reply about this job.

Cementitious Tanking — Basement Waterproofing

What's involved

Tanking is barrier protection: a waterproof coating bonded straight onto the structure. Old plaster, paint and salts are stripped back to sound brick or concrete, and the surface is cleaned, wetted and keyed. The specialist then brushes or trowels on two or three coats of cementitious slurry, often with a polymer additive, and forms a fillet at the wall-to-floor junction where leaks most often start. Tanking works well where water pressure is low, or above ground level against damp earth on one side of a room. It is less forgiving than a membrane: any crack or movement in the structure can let water through, and it cannot be fixed to timber or crumbling stone. Expect three to five days plus curing time before plastering. Fixings must not be driven through the tanking afterwards, so plan shelves and sockets in advance.

How we handle it

  1. Send your details

    Use the quote form to tell us about the space, how it is used now, what you want it for and any water you have seen. Photos of walls, floor and any staining help the specialist judge the job before visiting.

  2. Site survey

    A local waterproofing specialist inspects the basement inside and out, takes moisture readings, checks drains and ground levels, and discusses the grade of protection you need for your planned use.

  3. Written design and quote

    You receive a written recommendation explaining the system, why it suits your building, how long it will take and a fixed all-in price. Nothing is booked until you are happy with it.

  4. Installation

    The team protects access routes, strips old finishes, installs the membrane, tanking, channels and sump as designed, and tests the drainage before any boards or screed go on top.

  5. Handover and servicing

    You get system drawings, product details and warranty paperwork, plus advice on fixings and annual sump servicing so the basement stays dry for the long term.

Price guide

Basement waterproofing is priced per square metre of wall and floor treated, plus fixed costs for drainage channels, sump chambers and pumps. The biggest swings come from the grade of protection needed, the condition of the walls and how hard it is to get materials in and out. A survey fixes the scope, then you get one all-in written price.

  • Sump pump system: £1,800–£3,500. Chamber, twin pumps, high-level alarm, battery backup and discharge pipework to outside.
  • Cementitious tanking: £70–£130 per m². Stripping, preparation, fillets and multi-coat slurry; replastering on top priced separately.
  • Cavity drain membrane (walls and floor): £90–£160 per m². Supplied and fitted including sealing and perimeter channel; boarding and screed are usually extra.

Questions about cementitious tanking

Is tanking or a cavity membrane better for a basement?

A cavity drain membrane is usually better for older cellars, because it manages water rather than trying to block it and copes with building movement. Tanking bonds directly to the wall, so any crack can let water through, and it is best where water pressure is low. Many specialists combine the two, and BS 8102 recommends considering combined protection for habitable spaces.

Get a free basement waterproofing quote

Tell us what you need and we'll come back with a clear price.

Request a quote