Basement Waterproofing

Nationwide · England, Scotland & Wales

Basement Waterproofing across the UK

Dry, usable basements and cellars, designed to BS 8102.

In short

Basement Waterproofing is the work of stopping groundwater and damp from entering below-ground rooms such as cellars, basements and lower ground floors. It uses three recognised methods under BS 8102: barrier protection (tanking), structurally integral protection (waterproof concrete) and drained protection (cavity drain membranes with a sump pump), often combined for a dry, habitable space.

  • Free, no-obligation quotes
  • Vetted, insured specialists
  • Clear fixed prices

Free Basement Waterproofing quote

No obligation. We only use your details to reply about this job.

Fixed, clear prices

One all-in price before any work starts.

Vetted specialists

Insured teams who do this work every week.

Responsible disposal

Licensed waste routes and proper paperwork.

500 areas covered

Pages for every town we serve.

Most UK cellars were built to store coal, not to be lived in. Their brick or stone walls sit in wet ground, and water pushes through mortar joints, floor slabs and the junction where wall meets floor. We arrange surveys and waterproofing through a network of vetted, insured local specialists who design systems to BS 8102, the British Standard for protecting below-ground structures against water. The aim is simple: a dry room you can use for storage, a gym, an office or a bedroom.

Every job starts with a survey, because the right system depends on the water table, the wall construction and what you want the space for. A damp wine cellar needs a different grade of protection from a habitable basement flat. Your specialist will explain the options in plain terms, give a fixed written quote, and plan the work around drainage, electrics and any later fit-out. Tell us about your basement using the quote form and we will match you with a local team.

How it works

  1. Send your details

    Use the quote form to tell us about the space, how it is used now, what you want it for and any water you have seen. Photos of walls, floor and any staining help the specialist judge the job before visiting.

  2. Site survey

    A local waterproofing specialist inspects the basement inside and out, takes moisture readings, checks drains and ground levels, and discusses the grade of protection you need for your planned use.

  3. Written design and quote

    You receive a written recommendation explaining the system, why it suits your building, how long it will take and a fixed all-in price. Nothing is booked until you are happy with it.

  4. Installation

    The team protects access routes, strips old finishes, installs the membrane, tanking, channels and sump as designed, and tests the drainage before any boards or screed go on top.

  5. Handover and servicing

    You get system drawings, product details and warranty paperwork, plus advice on fixings and annual sump servicing so the basement stays dry for the long term.

Basement Waterproofing prices

Basement waterproofing is priced per square metre of wall and floor treated, plus fixed costs for drainage channels, sump chambers and pumps. The biggest swings come from the grade of protection needed, the condition of the walls and how hard it is to get materials in and out. A survey fixes the scope, then you get one all-in written price.

JobGuide priceNotes
Damp and water ingress survey£150–£350Site inspection, moisture readings and a written report with recommendations; often credited against the work.
Cavity drain membrane (walls and floor)£90–£160 per m²Supplied and fitted including sealing and perimeter channel; boarding and screed are usually extra.
Cementitious tanking£70–£130 per m²Stripping, preparation, fillets and multi-coat slurry; replastering on top priced separately.
Sump pump system£1,800–£3,500Chamber, twin pumps, high-level alarm, battery backup and discharge pipework to outside.
Typical small cellar to Grade 3£8,000–£18,000Around 20–30 m² floor area with membrane, sump and boarding ready for decoration.
Annual sump servicefrom £150Pump and alarm testing, chamber clean, battery check and channel flushing through inspection ports.

What affects the price →

Who we work for

Homeowners

Owners of Victorian and Edwardian terraces with damp cellars who want dry storage, a utility room or extra living space without the cost of extending upwards or outwards.

Landlords

Landlords converting lower ground floors into lettable rooms or flats, who need a Grade 3 system, Building Regulations sign-off and paperwork that satisfies lenders and letting agents.

Property developers

Developers adding value to period houses with basement conversions, who need waterproofing designed early and coordinated with structural engineers, party wall surveyors and building control.

Buyers and sellers

People mid-sale where a survey has flagged damp or water in the cellar, who need a specialist report and a clear quote to agree a price or a retention.

Commercial premises

Pubs, shops and offices with beer cellars, plant rooms and stores below ground that suffer seepage, where downtime has to be kept to a minimum.

Rules and standards that apply

  • BS 8102:2022 is the British Standard code of practice for protecting below-ground structures against water ingress; it sets out Grades 1 to 3 of protection and Types A (barrier), B (structurally integral) and C (drained).
  • Converting a cellar into a habitable room counts as a material change of use under the Building Regulations, so you will need building control approval covering moisture resistance, ventilation, fire escape and insulation.
  • If work involves excavating near a neighbour's foundations or cutting into a shared wall, the Party Wall etc. Act 1996 in England and Wales may require you to serve notice on adjoining owners.

How to choose the right basement waterproofing company

  • Ask whether the surveyor holds the CSSW (Certificated Surveyor in Structural Waterproofing) qualification or has equivalent training in BS 8102 design.
  • Check that the quote names the BS 8102 grade the system is designed to achieve and explains why that grade suits your planned use.
  • Make sure the price includes sump pumps, alarms, battery backup and discharge pipework rather than listing them as extras later.
  • Ask what warranty comes with the system and whether an insurance-backed version is available if you plan to sell.
  • Confirm who handles boarding, screed and plastering after the waterproofing so nothing pierces the membrane.
  • Ask for written servicing advice, because drained systems need regular maintenance to keep working.

Frequently asked questions

How much does basement waterproofing cost in the UK?

Most UK basement waterproofing jobs cost £90–£160 per square metre for a cavity drain membrane, or £70–£130 per square metre for tanking. A typical small cellar made fully habitable with a membrane, sump pump and boarding comes to around £8,000–£18,000. Larger basements, poor access and pumped drainage push costs up. A survey gives you a fixed figure.

Is tanking or a cavity membrane better for a basement?

A cavity drain membrane is usually better for older cellars, because it manages water rather than trying to block it and copes with building movement. Tanking bonds directly to the wall, so any crack can let water through, and it is best where water pressure is low. Many specialists combine the two, and BS 8102 recommends considering combined protection for habitable spaces.

Do I need planning permission to waterproof a cellar?

Waterproofing an existing cellar does not normally need planning permission. Converting it into a habitable room does need Building Regulations approval, and digging out to create a new basement or lowering the floor may need planning permission and party wall notices. Listed buildings need listed building consent for most changes, so check with your council before work starts.

How long does basement waterproofing take?

A typical cellar of 20 to 30 square metres takes about one to two weeks to waterproof, including stripping old finishes, fitting the membrane, cutting perimeter channels and installing a sump. Tanking needs extra drying time before plastering. A full conversion with insulation, electrics and decoration usually runs three to six weeks from start to finish.

What is BS 8102?

BS 8102 is the British Standard code of practice for protecting below-ground structures against water from the ground. It describes three types of protection, barrier, structurally integral and drained, and three grades of dryness depending on use. Designers use it to choose the right system, and building control, warranty providers and lenders often expect basement work to follow it.

Why is my cellar damp?

Cellars are damp because their walls sit in wet ground and water moves through brick, stone and mortar by pressure and capillary action. Other common causes are leaking drains, high outside ground levels, blocked air bricks, faulty downpipes and condensation from poor ventilation. A survey separates these, because fixing a leaking gutter can be cheaper than waterproofing the whole room.

Does a cavity drain membrane need a sump pump?

A cavity drain membrane needs somewhere for the collected water to go, which is usually a sump pump. If the basement floor sits above a nearby drain or the ground falls away, gravity drainage to outside may be possible instead. Where a pump is used, twin pumps, a high-level alarm and battery backup are strongly advised to cover pump failure and power cuts.

Can you waterproof a basement from the inside?

Yes, nearly all UK basement waterproofing is done from the inside, because digging out around the outside of a terraced house is usually impossible. Internal cavity drain membranes and tanking are designed for this. External waterproofing is mainly used on new builds, where membranes can be applied to the outside of walls before backfilling.

See all FAQs →

Get a free basement waterproofing quote

Tell us what you need and we'll come back with a clear price.

Request a quote