Portsmouth · South East
Basement Waterproofing in Portsmouth
From Victorian terraces to newer lower ground floors, we help Portsmouth owners turn wet basements into dry, usable rooms.
Our Portsmouth coverage
We cover all of Portsmouth and the wider Portsmouth area. Jobs here are mostly in the PO6, PO4, PO1, PO2, PO5 and PO3 postcode areas. The same team covers Gosport and Purbrook too.
Local considerations in Portsmouth
The South East has a large share of 1930s semi-detached housing and post-war estates, with plenty of new-build development around its larger towns. Victorian cellars in Portsmouth usually have solid brick walls with no damp-proof course, so membrane systems are preferred over rigid tanking. Low-lying areas of Portsmouth can see a rising water table in storms, which affects the grade of protection and pump capacity chosen.
Basement flats in Portsmouth often share walls and drains with neighbours, so the design accounts for party walls and shared discharge points. Where parking is tight in Portsmouth, specialists may need a permit or bay suspension for a van and skip; we flag this at survey stage.
Basement Waterproofing jobs we handle in Portsmouth
Cementitious Tanking
Waterproof slurry or render applied directly to prepared walls and floors to form a continuous barrier against water and damp.
Cavity Drain Membrane Systems
Studded plastic membranes fixed to walls and floors that let water in behind them and channel it to a drain or sump, keeping the room dry.
Leak Repairs and Remedial Waterproofing
Finding and fixing active leaks, failed tanking, blocked channels and burnt-out pumps in existing basement waterproofing systems.
Cellar Conversion Waterproofing
Waterproofing designed as part of turning a cellar into a habitable room, coordinated with insulation, ventilation, electrics and Building Regulations.
Damp and Water Ingress Surveys
A specialist inspection to find where water is getting in, why, and which waterproofing grade and system suits your basement.
Sump Pump Installation and Servicing
Sump chambers, twin pumps, battery backup and high-level alarms that remove water collected by drained waterproofing systems.
How much it costs in Portsmouth
- Typical small cellar to Grade 3: £8,000–£18,000. Around 20–30 m² floor area with membrane, sump and boarding ready for decoration.
- Sump pump system: £1,800–£3,500. Chamber, twin pumps, high-level alarm, battery backup and discharge pipework to outside.
- Cementitious tanking: £70–£130 per m². Stripping, preparation, fillets and multi-coat slurry; replastering on top priced separately.
Prices are a guide. Your quote for Portsmouth is a fixed price based on the details you give us. Full price guide.
Basement Waterproofing questions from Portsmouth
Is the water table high in Portsmouth?
Ground conditions vary street by street in Portsmouth, so a local specialist will check for signs of a high water table during the survey. Clay soils, nearby rivers and slopes all affect how much water presses on basement walls, which shapes the system and pump capacity recommended.
Do you cover cellars near Portsmouth as well as the centre?
Yes. Our specialists cover Portsmouth and surrounding areas including South Hayling and Waterlooville, across Portsmouth. Rural and village properties are welcome; tell us the location on the quote form and we will match you with a team that works there regularly.
Can I sell my Portsmouth house with a damp cellar?
You can, but buyers' surveyors in Portsmouth will usually flag it, and some lenders may want a specialist report or retention. Having the cellar surveyed and waterproofed with a warranty often makes the sale smoother and supports your asking price.
Can you waterproof a basement flat in Portsmouth?
Yes. Basement and lower ground flats in Portsmouth are a common job. The design accounts for shared walls, drains and access, and a pumped system can discharge to an agreed point. If you are a leaseholder, check whether the freeholder needs to consent before booking.
How long does basement waterproofing last?
A well-designed cavity drain membrane can last for decades, because the plastic membrane itself does not degrade underground. The weak points are pumps and drainage channels, which need annual servicing. Tanking can last a long time but may crack if the building moves. Keeping system drawings and service records also helps when you come to sell.
Can I put screws or shelves into a waterproofed wall?
You can fix into a membrane system once it has been boarded or battened, because fixings go into the lining, not through the membrane. Tanked walls must not be drilled after waterproofing unless the hole is resealed with a compatible product. Plan shelving, sockets and radiators with your specialist so fixing points can be built in.
Helpful guides
Converting a Cellar into a Habitable Room: What's Involved
Converting a cellar into a habitable room means waterproofing it to BS 8102 Grade 3, then insulating, ventilating, wiring and finishing it…
Read the guide →How Much Does Basement Waterproofing Cost in the UK?
Most UK basement waterproofing costs £90–£160 per m² for a cavity drain membrane or £70–£130 per m² for cementitious tanking. A sump pump…
Read the guide →Get a free basement waterproofing quote in Portsmouth
Tell us what you need and we'll come back with a clear price.
Request a quote