Doncaster · Yorkshire and the Humber
Basement Waterproofing in Mexborough
Homes in Mexborough and Wath upon Dearne often have cellars built for coal, not living. We arrange surveys and waterproofing to change that.
Mexborough and the surrounding area
We cover all of Mexborough and the wider Doncaster area. That includes the S64 postcode districts. The same team covers Conisbrough, Thurnscoe, Goldthorpe, Bolton upon Dearne and New Edlington too.
Working in Mexborough
From back-to-back terraces in the cities to stone cottages in the Dales villages, housing across Yorkshire varies a great deal. Victorian cellars in Mexborough usually have solid brick walls with no damp-proof course, so membrane systems are preferred over rigid tanking.
Rural properties near Mexborough often have stone cellars and springs or high water tables, so drained systems with reliable pumping are common. Power cuts are more frequent in remote spots around Mexborough, so battery backup on sump pumps is especially important.
Our services in Mexborough
Cellar Conversion Waterproofing
Waterproofing designed as part of turning a cellar into a habitable room, coordinated with insulation, ventilation, electrics and Building Regulations.
Leak Repairs and Remedial Waterproofing
Finding and fixing active leaks, failed tanking, blocked channels and burnt-out pumps in existing basement waterproofing systems.
Cavity Drain Membrane Systems
Studded plastic membranes fixed to walls and floors that let water in behind them and channel it to a drain or sump, keeping the room dry.
Cementitious Tanking
Waterproof slurry or render applied directly to prepared walls and floors to form a continuous barrier against water and damp.
Sump Pump Installation and Servicing
Sump chambers, twin pumps, battery backup and high-level alarms that remove water collected by drained waterproofing systems.
Damp and Water Ingress Surveys
A specialist inspection to find where water is getting in, why, and which waterproofing grade and system suits your basement.
Guide prices for Mexborough
- Cementitious tanking: £70–£130 per m². Stripping, preparation, fillets and multi-coat slurry; replastering on top priced separately.
- Cavity drain membrane (walls and floor): £90–£160 per m². Supplied and fitted including sealing and perimeter channel; boarding and screed are usually extra.
- Damp and water ingress survey: £150–£350. Site inspection, moisture readings and a written report with recommendations; often credited against the work.
Prices are a guide. Your quote for Mexborough is a fixed price based on the details you give us. Full price guide.
Basement Waterproofing questions from Mexborough
How soon can someone survey my basement in Mexborough?
Surveys in Mexborough can usually be arranged within a week or two, sooner if water is actively coming in. Send photos with your quote request so the specialist can prioritise urgent jobs and bring the right equipment on the first visit.
How much does basement waterproofing cost in Mexborough?
In Mexborough, most cellar waterproofing jobs are priced at £90–£160 per square metre for a cavity drain membrane, with sump systems from around £1,800. A small cellar made fully habitable typically costs £8,000–£18,000 depending on size and access. Request a quote and a specialist will survey and give you one fixed price.
Do your Mexborough specialists service existing sump pumps?
Yes. Local specialists serving Mexborough and Wath upon Dearne can service existing sump systems, test pumps and alarms, replace batteries and flush drainage channels. Annual servicing typically starts from £150 and is the best way to avoid a flooded basement.
Is the water table high in Mexborough?
Ground conditions vary street by street in Mexborough, so a local specialist will check for signs of a high water table during the survey. Clay soils, nearby rivers and slopes all affect how much water presses on basement walls, which shapes the system and pump capacity recommended.
How long does basement waterproofing take?
A typical cellar of 20 to 30 square metres takes about one to two weeks to waterproof, including stripping old finishes, fitting the membrane, cutting perimeter channels and installing a sump. Tanking needs extra drying time before plastering. A full conversion with insulation, electrics and decoration usually runs three to six weeks from start to finish.
Do I need planning permission to waterproof a cellar?
Waterproofing an existing cellar does not normally need planning permission. Converting it into a habitable room does need Building Regulations approval, and digging out to create a new basement or lowering the floor may need planning permission and party wall notices. Listed buildings need listed building consent for most changes, so check with your council before work starts.
Helpful guides
Cavity Drain Membrane vs Tanking: Which Is Better for a Basement?
A cavity drain membrane is usually the better choice for old UK cellars because it collects water and drains it away instead of trying to…
Read the guide →BS 8102 Explained: Basement Waterproofing Types and Grades
BS 8102:2022 is the British Standard code of practice for protecting below-ground structures from groundwater. It sets three types of…
Read the guide →Get a free basement waterproofing quote in Mexborough
Tell us what you need and we'll come back with a clear price.
Request a quote